Cracking administrator User account!

Hi People,
After Long Time have found one Trick here
With this trick you will be able to get access to other user accounts on your Computer
Provided you yourself have administrative previlege.

Requirements:
An active user account with administrative(it should not be a limited account) privilege.

Steps to Follow:

1] Open Command Prompt


2] Type there "net(space)user(Enter)"
This Will show you the list of user accounts on the compter.


3] Type "net(space)user(space)name of the user account you want to change(space)*(star)(Enter)"



4] It will ask you for a new password.
It will again ask you to Confirm password
You are done!!!

Happy Hacking!


Note:

1]You should have an administrative user account on this computer for this trick to work.
2]It will not ask you for Old password.
3] When you type the new password it will not appear to you as a star or anything else
It does not show you the Encrypted password.

Performing these tricks are solely related to your area of interest.

Using these tricks for any personal benefit may lead to legal action.

How To Block A Specific Website From Viewing!

Hi Guys........


With This Trick You Will be able To block the web Site which You want from viewing.

>>>>>>>>>>>Follow The Steps<<<<<<<<<<<

GO TO: C:\Windows\System32\Drivers\Etc
Inside This Folder You Will Find a File with Name as "Hosts"

Open This file with NOTEPAD

In this notepad at the very end you will find an IP address(mostly "127.0.0.1") and "localhost" Written in front of it.

Just in next line give an another IP address For eg. 127.0.0.2(Give some space) and write the name of the website You want to block

eg. 127.0.0.2 www.blogger.com

Save This file by Clicking on File>save
And restart the computer
And Now you are Done>>>>Page cannot Be displayed
Similarly if U want to block more than one web site
Follow the give step and in the next line put the last set of an ip as Next digit

eg. 127.0.0.2 www.blogger.com
127.0.0.3 www.(name of website).com
127.0.0.4 and so on


Plz respond if u like it.

Crack For MS OFFICE Home and Student Edition

"Follow These steps to use MS office home and student edition 4 lifetime"

=> GO TO REGEDIT
"HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Office\12.0\Registration\"
deleted this key:{90120000-0030-0000-0000-0000000FF1CE}OR {91120000-0030-0000-0000-0000000FF1CE}Which Ever IS there
NOW
=> GO TO C:\Programs\Common files\Microsoft Shared\OFFICE12\Office Setup Controller\Proof.pt or en
=> You Will Find the Following File "Proof.XLM"
=> Right Click On this File and Open With NOTEPAD
=> Change to
=> Save the File
=> Restart The computerand Yo! Yo! Yo!

Resolution For MediaCenter : "ehshell.exe - No debugger found"

Hi People
Sometimes When we are trying to open Medicenter
We get Following Error Message
"ehshell.exe - No debugger found"

Resolution:

Click START>>>>RUN>>>CMD>>>

Type: regsvr32.exe atl.dll
Type: cd \
Type: cd windows
Type: cd eHome
Type: ehSched /unregServer
Type: ehSched /service
Type: ehRecvr /unregServer
Type: ehRecvr /service
Type: ehRec.exe /unregServer
Type: ehRec.exe /regserver
Type: ehmsas.exe /unregServer
Type: ehmsas.exe /regserver
Restart Media Center

Kudos!!!!!

Configuring Windows Mail

Hi People,
Simple Steps for you to Configure Windows Mail
Enjoy!

1] Open windows mail, and from the Tools menu select Accounts.

2] Click the Add button

3] Now, select Email Account and click Next



4] Type the Name You want to Display

5] Enter your complete email address and click Next
Put you email address

6] Select POP3 and SMTP e-mail server type

7] Enter your email username and Password from your ISP

8] Click Next and then - Finish


Plz reply if U like The Post

INSTANT IE FIXES

HERE ARE SOME IE7 FIXES

Problem: Crashes or hangs

If IE crashes, the most likely problem is that there's a buggy add-on (Toolbar or Browser Helper Object). In order to verify and isolate the buggy add-on,

follow these steps:

1] Start IE in No Add-ons mode, either by right-clicking the Desktop icon, or clicking START RUN and typing: iexplore.exe -extoff

2] Determine if IE fails.

3] If not, use Tools Manage Add-ons to disable all browser extensions and toolbars.

4] Restart IE and reenable browser extensions one-by-one.

5] Once you've found a broken extension, contact the manufacturer and ask for an update.

(Reference: http://support.microsoft.com/?id=928426 )

If IE still crashes on startup, and you've got Google Desktop installed, please ensure that you update to the latest version of Google Desktop.

Problem: The "Mail" button is missing

You can customize the toolbar to add or remove icons, including the mail icon

1] Right-click the Star icon in the IE window

2] Choose Customize Command Bar

3] Choose Add or Remove commands

4] Click on the Read Mail item in the Available toolbar buttons list

5] Click the Add button to move the button to the Current toolbar buttons list

6] Click the Close button

If the button still isn't visible, it may be pushed off the side of the screen. To fix this:

1] Right-click the Star icon in the IE window

2] Uncheck Lock the Toolbars

3] Drag the dotted splitter in the command bar to the left until all of the buttons are visible

Problem: Website blocks IE7 (e.g. it "requires" IE6)

Run into a website that requires IE6? Spoof the site by tweaking your user-agent .

Problem: ClearType Text appears fuzzy

IE7 turns on a text-smoothing technology called "ClearType" by default. ClearType is scientifically proven to make text easier to read, particularly on LCD flat panel monitors.

If ClearType looks fuzzy on your monitor, you might want to try the ClearType tuning wizard , which can help you adjust the display of ClearType.

If you still don't like the appearance of ClearType, you can turn it off by unchecking the checkbox: Tools Internet Options Advanced Multimedia Always use ClearType for HTML.

Problem: Slow Startup

1] Follow the "Crashing on startup" steps above to see if starting in No Add-ons mode starts much faster

2] If you're not using a proxy, uncheck IE's "Automatically detect settings" option on the Tools Internet Options Connections LAN Settings dialog

Problem: Slow Page rendering

1] Increase the connection limit. This tweak allows IE to make up to 16 connections per server.

2] Ensure that both "HTTP1.1" checkboxes in Tools Internet Options Advanced are checked.

Problem: IE7 Setup fails to install Internet Explorer

See http://support.microsoft.com/kb/917925

Problem: My address bar won't turn green?

IE7 includes a cool new feature that turns the address bar green when a secure site presents an Extended Validation certificate :

If you're having trouble with this feature, on a site you know has an EV certificate:

1] Ensure that you either have the Phishing Filter set to "Automatic" mode or Tools > Internet Options > Advanced > Security > Check for Server Certificate revocation checked.

2]If that doesn't work, install this: Windows Root Certificate Update and restart

Problem: After installing, IE7 starts then vanishes

It's possible that one of IE's DLLs isn't installed correctly

1] Click START RUN and type cmd

2] In the command prompt, type cd\

3] In the command prompt, type cd Program Files

4] In the command prompt, type cd Internet Explorer

5] In the command prompt, type regsvr32 IEPROXY.DLL (Reference: http://support.microsoft.com/?id=928427 )

Problem: Error message about PSAPI.DLL

If you install IE7 and the following error message begins to show:
The procedure entry point GetProcessImageFileNameW could not be located in the dynamic link library PSAPI.DLL
1] Search your hard disk for PSAPI.dll.

2] Any copies of this DLL that are found outside of the Windows or Windows\System32 folder should be renamed to PSAPI.bak.

Problem: IE always goes to http://runonce.msn.com/runonce2.aspx instead of your homepage

If IE7 always goes to the RunOnce page on startup, even after you've tried to save the first run settings, it's possible that the mechanism that IE is using to save the settings does not work for some reason.
You can prevent IE from going to the RunOnce page and cause it to go directly to your homepage by running this script .

WINDOWS SIDEBAR NOT WORKING

Hi People Im Back With the another Tedious Fix

Sometimes We do not get our windows sidebar on our computer desktop
When we go in Control Panel it does not show up (The option is grayed out)
Perform The following steps

1. Open a command prompt by being Administrator (Right click on Command Prompt and click Run as Administrator)
2. CD to C:\Program Files\Windows Sidebar ( cd drive letter:\Program Files\Windows Sidebar )
3. Run these commands in this order:
1. regsvr32 -u sbdrop.dll
2. regsvr32 -u wlsrvc.dll
3. regsvr32 atl.dll
4. regsvr32 sbdrop.dll
5. regsvr32 wlsrvc.dll
6. Restart The Computer
7. If all The gadgets are not available go to http://vista.gallery.microsoft.com/vista/SideBar.aspx?a=&mkt=en-us And Download sidebar gadgets For free

Plz Reply if u like the post

Core Media Center Setup

This Will help you to perform Initial Setup for Media Center.

After initial setup of the computer When you click on Media Center Icon
you will find the following Screen



It will show you three options for Setup
1] Express Setup
2] Custom Setup
3] Run Setup Later

Select the first option "Custom Setup" and follow the wizard

Click on Next

Again Click On Next


To View the Privacy Statement Click on View Tab
OR Click Next


Click on Yes or No As per your choice
Click Next

Click on next again


Following are the stages of Media Center Setup

>>>>>>CONFIGURE TV SETTINGS<<<<<<<< Select United States and Click Next


Select the 1st option for automatic configuration of TV signals

Media Center is scanning for TV signals
It will show you your Signal Configuration



Mostly the TV signal is through Cable
Select Yes and Click Next

Select Yes For Guide

Click I agree as Usual



For Checking the Accurate program guide Use the right Zip code of the area

This Will Search From Program Guide


Select Your Cable Company

Setup Will Download Program Guide


Ist Stage of Setup Finished

>>>>>>>CONFIGURE DISPLAY SETTINGS<<<<<<<
Click Next to Continue


Select the type of display you are connecting to


Select the Type of Screen Set


Select the type of cable and port

Type of Monitor display
Normal or Wide Panel Monitor

Check the correct Resolution


You Can either adjust or Finish With the Wizard

>>>>>> CONFIGURE SPEAKER SETTINGS<<<<<<<
Click Next


Select the Type of Speakers You have


Test the Functionality of the speakers


Click on Finish

Here comes the last Stage of Setup

>>>>>> CONFIGURE LIBRARY SETUP <<<<<<< You can Watch Videos From Specific Folder you want to


Here We are finish with the setup of our Media Center

Any Queries
Plz Post a Valid Comment

File and Settings Transfer Wizard

Hi Guys,
Introducing you to our windows xp OS
Did You Know!

File and setting transfer wizard is used to transfer your personal settings
to new computer.
here are the steps to be followed:

It is done in two stages.
Ist stage to copy file and settings and put them on removable disc drive
IInd stage to run file and settings transfer wizard on new computer.

GOTO:
start>>all program>>accessories>>System tools>>file and settings transfer wizard.
You will see the following screen,




Click on Next

Select it as Old Computer
As you will be transferring your settings from old computer to the new one.


This Screen will show you where you are saving the new settings'
1] Directly transfer to the new computer.
2] Sending through Home Network.
3] Saving in Floppy Drive
4] Storing on the same computer to specific Location from where you can copy it
on removable disk drives.

After selecting Click Next,


This will ask you what all you want to transfer
Settings,Files or both of them
select as you wish.
You can also customize it by checking the box below
Through which you can transfer files and settings which you Wish to
Click Next,


Click Next,

Click on Finish.
Ist Stage completed.


After this you will have to run the same wizard on new computer

Follow the steps,

Open file and settings transfer wizard.

Select as New Computer
Click Next

Select the last Option as we have already collected the files and settings
from our old computer.
Click Next,
From Here u can give the path From where you have saved your files and settings
1]Directly by network cable
2]If you have saved files on floppy Drive
3]You can give the specific location too, where you have saved the files and settings
on the new computer Through any removable media.
Eg. Flash Drive,CD/DVD,Personal media drive etc.

Click Next

This will Apply your Settings.
Click Next,

After you click on finish,
It will ask you to Log Off,
Do the same and here You are Done.

You Will Be able to see your same settings
same wallpaper.......Everything.

Plz Reply If you Like This Post.